SONDATEC HIGH TEMPERATURE CAMERA

Varekode: SON01X301
Housing SONDATEC 1.0 for cameras CAMTEC series, designed for continuous operation with high temperatures up to 2200°C, water and air compressed cooled.

KUN KAMERAHUS
(Kamera, linse og kjølesystem kommer i tillegg.
Bestillingsvare
kr 38 500,00

Produktbeskrivelse

Detaljer

SONDATEC housing series have been developed to allow the use of television camera in high temperature environments, as glass process, cement industry, iron&steel plant and boiler. These high-temperature camera systems provide clear, crisp images of the combustion process in boilers, furnaces, kilns, incinerators and other combustion chambers. With the real-time image provided, operators and engineers can monitor the proper flow of fuel and raw materials, reduce emissions, reduce fuel consumption, speed up boiler light off, and improve safety.

SONDATEC housings are available in different lengths from 300mm up to 4000mm, with diameters equal to 101.6mm.They are typically endowed with axial vision and they can allow diagonal angles of vision up to 105°.

Depending on the behaviour of the chemicals involved in the process, SONDATEC camera housing should be made by special stainless steels, high-resistance alloys or by using superficial protections.

SONDATEC camera housings employ triple-wall laminar flow for efficient water cooling of the camera and allow operation in temperatures up to 2200°C (≈4000°F). Otherwise a special air cooled system allows operation in temperatures up to 700°C (≈1300°F).

SONDATEC housings are “pressurised”: an integral compressed air system supplies clean air (or appropriate gas) for cooling and particulate removal from the lens. In such a way the lens doesn’t require any expensive protection glass, crystal and protection porthole. A constant supply of clean air is essential for proper camera operation and protection: GFATEC series represent an effective filtration system able to remove contaminants and to provide high quality clean air in industrial environments.

SONDATEC housing is designed to be mounted either directly through the wall of a furnace or by using OUTEC series, a wall fixing medium endowed with a protective shutter type “porthole” that increases safety and easy maintenance.
If it is requested a penetration inside the furnace, SONDATEC housing may be provided with retraction devices, INTEC series: in case of system failure, or failure of the cooling supply, the retraction device automatically removes the housing from the furnace and seals the furnace porthole.

Tilleggsinformasjon

Tilleggsinformasjon

Varekode SON01X301
Utvidet info Nei

Produktomtaler

Skriv din egen omtale

Du omtaler: SONDATEC HIGH TEMPERATURE CAMERA

Produkttagger

Produkttagger

Bruk mellomrom for å skille tagger. Omgi setninger med apostrof (').